Daily controls United Kingdom

What Should a Food Business Do With a Swollen or Damaged Can?

Do not open, use or serve food from a swollen, leaking, rusted or badly damaged can. Reject it at delivery or isolate it from usable stock, check whether a recall applies and record the supplier, product, batch and action taken.

Do not open, use or serve food from a swollen, leaking, rusted or badly damaged can. Reject it if it arrives that way, or isolate it immediately if the damage is found later. Check the product and batch against current recall notices, keep it away from usable stock, and record what was found and what happened next.

The answer in 30 seconds

A swollen or “blown” can can indicate spoilage or microbial growth. A deep dent, rust, leak, damaged seam or broken seal can also make the container unreliable. Do not taste the contents or open the can to investigate. Hold it securely away from food in use, identify the product, supplier and batch, check official recall information, and follow the supplier’s or recall notice’s instructions for return or disposal. If the problem affects stock already sold or supplied, escalate it through the business’s food-incident procedure and contact the local authority for advice.

TapTick can help a food business include packaging condition in a delivery or stock check, record a failed result and keep the resulting action visible until it is closed. The business still decides its acceptance limits, disposal method and incident response within its food safety management system. See the TapTick features.

Why is a swollen can a food-safety concern?

The Food Standards Agency’s Safer Food Better Business guidance says swollen or blown packs can be a sign that bacteria have grown in food or drink. A can may also become unsafe when a deep dent, corrosion, puncture or damaged seam breaks the container’s integrity.

The problem cannot be resolved by checking the best-before date. A can can be within date and still be affected by a manufacturing fault, damage in distribution or poor storage. The food may also look or smell unusual only after the container is opened, which is why opening or tasting is not a suitable check.

This is not limited to cans. The same delivery and stock-control decision is relevant to swollen vacuum packs, broken jar seals, leaking containers and other packaging that no longer protects the food as intended.

What should staff do first?

Give staff a short instruction they can follow without improvising:

  1. Stop. Do not open, puncture, taste, cook or serve the product.
  2. Separate. Keep it away from usable stock and protect other food from any leak or rupture.
  3. Identify. Record the product name, pack size, batch or lot code, date marking and supplier.
  4. Check. Compare the exact product and batch with current official recall notices and any supplier message.
  5. Decide. Follow the documented hold, rejection, return or disposal procedure.
  6. Record and escalate. Note the action taken and tell the responsible manager where the issue may affect more stock or customers.

If the can is swollen or may rupture, handle it carefully and avoid unnecessary movement. A recall notice may contain product-specific disposal instructions. Follow those instructions rather than applying a generic disposal method.

Are all dented cans unsafe?

No. FSA guidance for food banks and charities says a shallow dent with no other obvious damage should not normally make canned food unsafe. A deep dent, however, can hide a split, hole or break in the seal. The same guidance says food in a can affected by a deep dent or rust should not be distributed or eaten.

For a food business, the practical control should be clearer than “use judgement.” Define what staff must reject or hold. That list should include:

  • any swollen or bulging can;
  • a leaking, punctured or ruptured can;
  • a deep dent, especially at a seam or rim;
  • rust or corrosion that may have affected the container;
  • a loose lid, broken seal or damaged closure;
  • a can that spurts or shows other abnormal signs of pressure; and
  • any pack covered by an official recall or supplier withdrawal notice.

A business may choose a stricter rejection rule because that is easier for staff to apply consistently. The acceptance limit should be documented in the delivery or stock-control procedure and agreed with suppliers.

What should happen at delivery?

Packaging condition belongs in the delivery check, alongside product identity, date marking and temperature where relevant. Inspect a representative sample from a large delivery and pay attention to the bottom and sides of cases where damage can be hidden.

FSA guidance says stock should be clean and undamaged and gives swollen packs and badly dented cans as examples of food to throw away. It also advises businesses to reject a delivery, contact the supplier and record the details when food has not been handled safely. Food Standards Scotland’s CookSafe guidance similarly says incoming food should not be accepted when serious packaging damage exposes it to contamination risk.

If one can is damaged, check the rest of the case and nearby cases before accepting the delivery. Record whether the problem appears isolated or repeated, and keep the supplier’s credit, collection or disposal confirmation with the failed-delivery record.

What if damage is found in storage?

Move the product out of available stock without losing its identity. A hold area, labelled crate or other controlled location should prevent it being picked or used while the decision is pending.

Check:

  • whether other cans from the same case, batch or delivery show the same problem;
  • whether the stock has been exposed to heat, water, impact or unsuitable storage;
  • whether the affected product is used at another site;
  • whether an official recall or supplier notification has been issued; and
  • whether any affected units have already been used, sold or supplied.

Clean and disinfect any area contaminated by leakage using the site’s documented procedure, and protect staff from sharp metal or a container that may rupture. Do not return an affected can to normal storage simply because the exterior has been wiped clean.

How does a product recall change the response?

A damaged pack is normally managed through the business’s delivery, stock-control and corrective-action procedures. A recall adds a defined product scope and instructions that must be followed.

On 6 November 2026, the FSA and Food Standards Scotland published a recall of a specific Baxters Chef Selections Cullen Skink soup batch because a manufacturing fault could cause spoilage, swelling and possible rupture. The notice tells consumers not to open the affected can and gives specific disposal instructions. This is a useful reminder that a long best-before date does not override a batch-specific recall.

Always use the live official notice for the exact product, pack size, batch code, date marking and action. Do not remove every similar product merely because the brand or food description looks the same, and do not leave an affected batch on sale because its cans have not yet swollen.

For the wider response, see Food Withdrawal vs Recall: What’s the Difference? and How to Manage a Food Recall Across Multiple Sites.

What should the business record?

The record should let a manager reconstruct the event without relying on memory. Include:

  • date, time and site;
  • product, brand, pack size and quantity affected;
  • batch or lot code and best-before or use-by date;
  • supplier, delivery reference and delivery date;
  • what damage or abnormal condition was seen;
  • whether the product was rejected, held, returned or disposed of;
  • the recall notice or supplier instruction checked;
  • whether other stock, sites or customers were affected;
  • the person making and authorising the decision; and
  • the corrective action and evidence of closure.

A photograph can support the record, but it should not replace the product and batch details. Keep enough of the original label or case information to preserve traceability while the item is on hold.

When should the issue be escalated?

Escalate promptly when the same defect appears in several units, more than one delivery or more than one site; when a can has ruptured near other food; when affected food may already have been sold or served; or when illness or injury has been reported.

Where the business has reason to believe unsafe food has left its immediate control, follow the food-incident procedure and seek advice from the local authority. The response may require withdrawal from the supply chain or recall from consumers. Do not wait for every can to show visible damage before acting on a confirmed batch problem.

A single transit-damaged can can still require supplier follow-up, but it does not automatically mean the whole product line is unsafe. The scope should be based on the evidence: condition, batch, delivery, supplier information and official notices.

How should a multi-site operator respond?

Send the exact identification details to every relevant site: product name, pack size, batch or lot, date marking and a photograph of where the code appears. Ask sites to report quantities in stock, quantities already used or sold, and the action taken.

Central teams should be able to see which sites have responded and which have not. One site finding a swollen can may be the first signal of a wider supplier or batch problem. Review exceptions across locations before closing the action, and share the final supplier or authority instruction with the same sites that received the initial hold message.

If the problem came from delivery handling, correct the cause as well as removing the damaged stock. Actions might include stronger supplier requirements, better case inspection, changes to stacking or storage, staff retraining or increased verification for the next deliveries.

What is law and what is guidance?

The FSA’s Safer Food Better Business material and FSS CookSafe are official guidance designed to help businesses operate effective food safety controls. Their examples of swollen packs, badly dented cans and damaged packaging are not a standalone rule saying that every dent has the same legal result.

The legal duties are broader. Food businesses must not place unsafe food on the market, must operate appropriate food-hygiene procedures and must act when they believe unsafe food has left their control. The exact legal framework differs between Great Britain and Northern Ireland, so the business should apply the law and local-authority advice for the jurisdiction in which it operates.

The practical way to meet those duties is to define packaging acceptance limits, train staff, monitor deliveries and storage, preserve traceability, and document the action taken when a check fails.

Practical checklist

  • Define which packaging defects must be rejected or held.
  • Train delivery and stock staff not to open or taste suspect food.
  • Check cans, jars and sealed packs during every delivery.
  • Separate damaged stock from food available for use or sale.
  • Record the product, supplier, batch, date marking and quantity.
  • Check current official recall notices and supplier messages.
  • Follow product-specific return or disposal instructions.
  • Inspect other units from the same case, batch and delivery.
  • Escalate when stock may have been sold, served or distributed.
  • Check other sites and close the action only when every response is known.
  • Review repeat defects with the supplier and correct the underlying cause.

Official sources

Important: This article is general operational guidance for UK food businesses, based on official sources available on 7 November 2026. Product recalls and disposal instructions are specific to the named product and batch, and food-law requirements differ in some respects between Great Britain and Northern Ireland. Check the live official notice, follow the business’s food safety management system and seek advice from the local authority when unsafe food may have been supplied.

Put the guidance into practice

Make the daily record easier to complete—and easier to prove.

Start with one site, no credit card required.